S&S CYCLE Camshaft - 560S - Big Twin

Features

• S&S cams are tested on the dyno, street and racetrack before being offered to the public
• With hundreds of test hours on them, you know that you are getting the best cam S&S can produce
• Recommend solid or performance aftermarket hydraulic lifters, stock hydraulic tappets are not recommended
• Not recommended for stock displacement or lower compression engines
• For 88" to 103" engines between 9:1 to 10:1 compression ratio
• Best response from 3500 to 6000 rpm
• Spring spacing required
• Made in the USA

Notes

• Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.

CALIFORNIA WARNING: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.

Specs

Product Name	Camshaft
Application	Intake / Exhaust
Grind	560S
Intake Lift	0.560"
Intake Open	20°
Intake Close	55°
Intake Duration	255°
Intake Lift at TDC	0.168"
Exhaust Lift	0.560"
Exhaust Open	60°
Exhaust Close	20°
Exhaust Duration	260°
Exhaust Lift at TDC	0.164"
Units	Each
Riding Style	Street