S&S CYCLE Camshaft Kit - 585G - Gear Drive -Twin Cam '06-'17

Features

• Designed for 88/96/103/110 cubic-inch engines with compression ratios from 10.0:1 to 10.5:1
• Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
• Increases valve timing accuracy by eliminating chain lash and loosely fit stock chain drive
• Material must be removed from inner surface of the stock gear cover to install
• 3500-6000 rpm for 88" to 103" engines and 2500-5500 rpm for larger engines
• A hydraulic press and other professional level tool are required for installation
• S&S recommends that adjustable pushrod/cover get be used
• Cam bearings and gaskets must be replaced when installing new cams
• Kit includes camshafts, inner gears, outer gears, inner bearings, outer bearings, gasket and instructions
• Made in the USA

Notes

• Installer must check coil bind, valve to valve clearance and valve to piston clearance.
• Due to the inherent characteristics of gear drives, more valve train noise may occur.
  

CALIFORNIA WARNING: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. Not legal for sale or use on any EPA pollution controlled motor vehicle.

Specs

Product Name	Camshaft Kit
Type	Gear
Application	Exhaust / Intake
Grind	585 Series
Intake Lift	0.585"
Intake Open	20°
Intake Close	45°
Intake Duration	245°
Intake Lift at TDC	0.186"
Intake Lobe Centerline	102.5°
Exhaust Lift	0.585"
Exhaust Open	60°
Exhaust Close	20°
Exhaust Duration	260°
Exhaust Lift at TDC	0.179"
Exhaust Lobe Centerline	110°
Units	Kit
Riding Style	Street